Please follow the instructions below to set up your Nippon SIM.
[For SIM cards]
1. Insert the SIM card:
Turn off your device and insert the SIM card into the SIM slot. If you’re using a dual-SIM phone, we recommend slot 1.
2. Turn on the device: After inserting the SIM card, turn your device back on.
3. APN settings:
・For iOS:
Depending on the product, the setup method may differ.
a) If “m-air.jp” is listed on the package as the APN:
No special settings are required. Simply inserting the SIM will automatically configure the network.
b) If another APN is listed:
Connect to Wi-Fi and scan the QR code from the package to install the profile.
・For Android:
While connected to Wi-Fi, go to:
Settings → Network & Internet → Mobile Network → Access Point Names (APN) → Add New APN
Enter the following information:
APN: [As listed on the product package]
Username: [If required]
Password: [If required]
Authentication type: CHAP or PAP/CHAP
4. Confirm connection:
Once settings are complete, check if 4G/LTE or 5G is displayed and test internet access.
[For eSIM]
1. Scan and install the eSIM
While connected to Wi-Fi, scan the QR code sent via email after purchase using your iPhone or Android device’s camera or through device settings. This will allow you to add a new mobile data plan.
2. Activate the eSIM
Go to your device’s “Cellular” (iPhone) or “SIM Manager” (Android), and enable the newly added eSIM.
3. APN Settings
While connected to Wi-Fi, scan the APN setup QR code included in your purchase confirmation email or package to install the eSIM profile. If no QR code is available, please enter the following APN settings manually:
・For Android:
Go to Settings > Network & Internet > Mobile Network > Access Point Names > Add new APN, and enter the following:
APN: [as provided in your confirmation email]
Username: [if required]
Password: [if required]
Authentication type: CHAP or PAP
4. Connection Check
After completing the setup, make sure your device displays a 4G/LTE or 5G icon, and test your internet connection.
